Page 9 - 2019-James-Machine-OpManual-012419-final

09

Operation (Continued)

5) cont‘d
c) Save the test results after being prompted (after 10
seconds). If the test is valid, select YES to return the arm REPEAT
assembly to the home position. Select NO if the test STEPS 5-9
becomes invalid, this assures that it will not be a log entry.
6 7 8
6) Turn the test tile clockwise 90° after prompting.

7) Adjust the tile by making sure it is flush against the sample
stop. Lightly dust off the tile to make sure it is free of
leather dust and any other extraneous matter.

8) Carefully unlatch the arm assembly by lifting the arm catch REPEAT
and lowering the arm to the correct position. (DO NOT STEPS 5-9 ▶
LET THE ARM FREE-FALL OR DROP INTO POSITION!
FAILURE TO FOLLOW THIS STEP COULD DAMAGE 9 10
THE MACHINE).

9) Repeat steps 5 through 9 as required by the standard.
The log will record and hold data for three tiles at four
sides each, for a total of 12 tests. After the 12th test run
or three tiles are complete, you can save the displayed ▶
▶
test results to the flash memory card.

10) View the results of your test by pressing VIEW LOG
on the control panel. You may also print your test
results by using the CSV files recorded on the machines
MICRO-SD card.